[https://youtu.be/2r9l1TYxcfE](https://youtu.be/2r9l1TYxcfE)
Make retro inspired wearables! We designed and 3d printed this to look like a gameboy that you can wear as a necklace.

Learn Guide: [https://learn.adafruit.com/circuitpython-sprite-animation-pendant-mario-clouds-flying-toasters/](https://learn.adafruit.com/circuitpython-sprite-animation-pendant-mario-clouds-flying-toasters/)

Print instructions

The pendant features an IPS display with animated graphics. It uses Adafruit’s Circuit Python to create animated sprites that look like flying toasters and scrolling clouds.

We made two versions, one for each display, so you can use the 1.3in or 1.54in IPS display.
It’s also easy to swap out the graphics and modify the code to make your own animations.

With Circuit Python, you use the Display IO library to generate custom graphics and interfaces.
Head on over to circuitpython.org and check out all of the support hardware from adafruit and the community!

ItsyBitsy M4
[https://www.adafruit.com/product/3800](https://www.adafruit.com/product/3800)

1.3” IPS Display
[https://www.adafruit.com/product/4313](https://www.adafruit.com/product/4313)

1.54” IPS Display
[https://www.adafruit.com/product/3787](https://www.adafruit.com/product/3787)

Lipo backpack
[https://www.adafruit.com/product/2124](https://www.adafruit.com/product/2124)

150mAh battery
[https://www.adafruit.com/product/1317](https://www.adafruit.com/product/1317)

Slide switch
[https://www.adafruit.com/product/805](https://www.adafruit.com/product/805)

10-wire silicon cover ribbon cable
[https://www.adafruit.com/product/3890](https://www.adafruit.com/product/3890)