Easy to print in one go!

Created it for a Marzocchi Bomber Z2.

The inner diameter is 4cm, but with the screw it schould be possible to mount on smaller Forks.

The only support you need is a paint on for the hole which hold the counternut at the GoPro attachment.

Used 15% infill on the mount so its a little flexible to get around the fork. You can secure it with the screw.

Need much and strong infill on the screw otherwise it will twist off!

Material used is PLA. Will let u know how well it lasts.

P,S, this is my first design so be gentle :)

Have fun!

P.S. If you like my work and wanna support me please [https://buymeacoffee.com/printit2024](https://buymeacoffee.com/printit2024)