Discover the wonderful world of 3D printing and fidget play with this long-lasting, magnet-operated mechanism! Use it to annoy your family and friends, enforce positive behavior when training your pets, or even use it as a musical instrument!

Update August 5, 2025: Updated the design to prevent buttons from sticking so much.

Required Hardware

4 - 6x3mm magnets

Assembly

When placing magnets in the switch mechanism and the casing, ensure they are set in a way that they attract each other.

I've designed the magnet holes to be a “loose” press fit. Due to the variations in how well everyone's printers are tuned, I didn't want to make the tolerance too high, so if your printer is more well tuned than others, you may find a need to glue the magnets in place.

Before gluing the cases together, ensure everything works properly together by doing a dry fit.

If everything fits nicely together, you should end up with a fully functioning clicker that doesn't wear out.

Happy clicking!

For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on Patreon, prints of this model can be used for commercial purposes.

Feel free to join my discord for additional support, questions, or suggestions!