Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Version 2 has these improved features:
- recessed latch and hinges for protection and less snagging
- stronger hinge that is easier to assemble
- ramped front latch catch for smoother closing
- ramped latch fixture for easier assembly
- text for multicolor
Look in [https://www.printables.com/@brass_ring/collections/1312629](https://www.printables.com/@brass_ring/collections/1312629) for other glasses accessories.
These glasses cases are printed as separate parts that are printed in orientations chosen to maximize strength and then snapped together.
The box halves require moderate infill (10%-20%) and can be printed with no supports. Optionally, you can paint on supports under the flat sections on the latch brackets, and the latch catch. I printed the box halves with 0.2 layer height in PLA, the latch with 0.2 layer height in PETG, and the hinge parts with .12 layer height in PETG.
Assembly instructions: See the attached PDFs
A "Gasket" option has been added to be printed in TPU to prevent the lens from rubbing in the case bottom/top. Print the gasket with 0 top and bottom layers and choose an infill that you like.
A drop of glue in each corner should secure it in place. A micro fiber cloth can also be used instead of the gasket.
Category: Tool Holders & Boxes
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta