Printing instructions:

If you want to scale it, do it only with x- and y- axis. Z-height must stay the same.

Print with 100% infill

First layer height: 0,2mm

Other layer heights: 0,12mm

First color change at layer 6 (0,80mm), second at layer 11 (1,40mm) and third at layer 15 (1,88mm).

You can use any color combination. In my picture I used the following filament:

1. Sunlu PLA+ Black
2. Sunlu PLA Fuchsia
3. Sunlu PLA+ Sunny Orange
4. Sunlu PLA+ White

A little tip: You can use a small cube as a wiping tower to ensure that the filament is printed correctly. I have included such a cube in the .3mf file. Also check the printing order: the cube must be printed first on each layer.