Hi, this Stand is designed to hold magnetic card cases, I use 35pt from Ultimate Guard. Please contact me if you need another size e.g. for Baseball Cards.

It has a 5° tilt to the back and is held by a small lip at the bottom front to keep it from falling backwards.

My printsettings are:

4 top-, bottomlayers and walls

10% infill 

but it doesn't really matter, make them as solid as you like(obviously a little bit of weight in the bottom helps with accidential knock-overs from wind or stumbling against the cabinet). And there is no support needed.

For the Toploader Version look here:

[https://www.printables.com/model/888133-toploader-stand](https://www.printables.com/model/888133-toploader-stand)