Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Materials
- 4x M3x3 heat set inserts (short)
- 4x M3x10 or M3x12 socket head screws
Optional: Print LED light pipe in transparent PETG (or skip altogether)
Preparation
- Insert M3 heat set inserts, being careful of posts with cut profiles
Assembly
- Remove heatsink assembly and mount-plate
- Install optional light-pipe (tight fit, but glue if necessary)
- Insert buttons in top shell with (“+” on right side)
- Install PCB into top shell
- Reinstall heatsink mount-plate onto PCB
- Install bottom shell & screws—go gently on front posts
- Apply fresh thermal paste
- Reinstall heatsink assembly
Printables
Atorch DL24P Electronic Load Case
Publicado em 22 de mai de 2024
17
Curtidas
266
Downloads
1
Impressões
Categoria
Electronics
Tags
case
atorch
dl24p
Licença
Creative Commons — Public Domain
Arquivos (8)
DL24P Case-Top.stl
999.8 KB
DL24P Case-Bottom.stl
807.4 KB
DL24P Case-Top.step
1.2 MB
DL24P Case-Bottom.step
465.6 KB
led_difusor.stl
10.5 KB
bt_setup.stl
162.2 KB
bt_increase_decrease.stl
222.2 KB
bt_start.stl
107.4 KB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta