Planter with a simple geometric design and holder plate(s)

Two different Plates/bases are provided:

         1- Rectangular double base

         2- Circular single base.

Planters with drainage as well as non-drainage designs  are provided.

The non-drainage pot(s) were tested with water for 48 hours and using the slicer settings below did not leak,

The planter is 75 mm height x  100 Width. 

With the base, 80 mm height with a 215mm wide base.
 

No supports required.

The slicer settings for the base(s) and planters themselves: 

     SUNLU PETG White

The slicer settings:

.20 mm Strength and Generic PETG
Infill %  - 100 , Rect
Wall Loops - 8
Top Shell - 8
Bottom Shell - 8
 

Seam: Aligned