Two different gutter cleaning tools designed for small metal gutters.  One is used to push or pull debris in the gutter.  The other has a hook for pulling debris through a gutter hanger obstacle.  The internal threads fit a painter's pole (.75 in, 6TPI).  A .25 in bolt, washer, and nut are used to connect the threaded piece to the scraper piece.  Two different scrapers are provided to come at the debris in the gutter from different directions.  The threaded pieces are designed in two parts so they can be printed flat on the bed without supports and then joined later with a bit of glue if desired.  This also gives more strength to the parts.