This is a drone frame for the Eachine E010 Mini.

Be aware that this frame makes the drone way more harder to control (and a lot faster). So it may not be suited for beginners. It also doesn't have prop guards, so you may want to be more careful with the drone to avoid small injuries and damage to walls... ^^

Instructions:

1. Print the Frame
2. Extract the electronics from the drone. (be aware that this destroys the original frame or you need to solder the wires off and back on...)
3. Screw the motherboard on the frame
4. Push the Motor in the Frame. (you need to remove the props)
   • Motor is held in place by friction... (works well for me)
5. Battery needs to be mounted on top with some kind of strap. (be creative. I used a cable organiser thingy) [https://www.aliexpress.com/item/32863296962.htmlspm=a2g0s.9042311.0.0.27424c4dpDY3lW](https://www.aliexpress.com/item/32863296962.htmlspm=a2g0s.9042311.0.0.27424c4dpDY3lW) 
6. Enjoy :)

I also added a new stick for the remote control. (makes it a little easier to control, because you can do finer adjustments.)

Print Settings

Printer:

Evnovo/Artillery Sidewinder x1

Rafts: 

No

Supports:

No

Resolution: 

0.16

Infill:

100

Filament: Owl Filament PLA Black

Category: R/C Vehicles