Inspired by this design by walter on Thingiverse: [https://www.thingiverse.com/thing:1688512](https://www.thingiverse.com/thing:1688512)

This model is significantly bigger and thus can hold significantly more weight. The backside is much longer to prevent the hook from coming off easily with upwards movement, a problem I found with the other design. Like walter's design, these hooks print on an angle to allow for a wide back end and narrow hook end without requiring support material.

Comes in 2 lengths: 123mm (~4.8") and 146mm (~5.7"). The black hook in the picture is 123mm, and the green ones are 146mm. You can also see the backs of 3 hooks in the pic.

Dimensions (LxWxH as printed):

123mm: 123x64x36mm

146mm: 146x64x36mm

Can be made with PLA (that's what I used), but PETG is recommended for lasting strength. Screenshot included of an example of how to fit a bunch on one print sheet.