You will find 2 kinds of components: bodies and diffusers.

Bodies

One wave is made of 5 body parts:

You can create different types of waves, adapting to your wishes. For example, part 3 can be removed, it will change the kind of waves as shown in the pictures.

You will find several versions of the body parts:

• Body X: you can plug parts on the right and/or left of it
• Body X edge: it finishes or starts, you can't plug anything after or before
• Body X edge with hole: same as edge but with a hole to pass cables inside for the strip LED

Bodies are pluggable together with holes to screw into the wall:

To link/clip them together, you'll have to force a little bit with an object like scissors on the edges.

Diffusers

There is only one kind of diffuser per body part. So 5 in total. It will clip properly in the body with a strong pressure, but easily allowing you to add and remove if needed.

Note: I've done several tests with the distances between the LED strip distance with the diffuser and the diffuser opacity to find the best rendering.

Print recommendations

No support is needed!

Used components

• LED strip (WS2812B 5m 60 IP65): [https://fr.aliexpress.com/item/2036819167.html?spm=a2g0o.order_list.order_list_main.5.172c5e5bL9tBK6&gatewayAdapt=glo2fra](https://fr.aliexpress.com/item/2036819167.html?spm=a2g0o.order_list.order_list_main.5.172c5e5bL9tBK6&gatewayAdapt=glo2fra)
• You can also checkout ESP32 case ([https://www.printables.com/fr/model/858548-minimal-esp32-case-with-dc-connector-for-wled](https://www.printables.com/fr/model/858548-minimal-esp32-case-with-dc-connector-for-wled))