Illuminated Stand

Stand with illumination for things like the Moon Lamp ([https://www.thingiverse.com/thing:2531838](https://www.thingiverse.com/thing:2531838)), Júpiter lithophane ([https://www.thingiverse.com/thing:2747956](https://www.thingiverse.com/thing:2747956)) or something of your own design.

I created this as a night light for my granddaughter. The stand includes an opening for a switch and a small hole for a photoresistor to "automatically" turn it off during daylight hours to save battery (should she forget to turn it off :-) ).

Once I got started I got a little carried away and designed a 9V and 3V (two AA) Battery design. I've also designed a circuit board and kit including all components to control the "Dark Detection". If you are interested in purchasing one, please let me know.

Inspired by:

Small Switch box cover [https://www.thingiverse.com/thing:2574994](https://www.thingiverse.com/thing:2574994)

jupiter light stand [https://www.thingiverse.com/thing:2809468](https://www.thingiverse.com/thing:2809468)

Glowing Moon Lamp Base [https://www.thingiverse.com/thing:2746894](https://www.thingiverse.com/thing:2746894)

LED-Diffuser [https://www.thingiverse.com/thing:2755877](https://www.thingiverse.com/thing:2755877)

9v Battery Holder [https://www.thingiverse.com/thing:2144462](https://www.thingiverse.com/thing:2144462)

Print Settings

Printer:

ANet A8

Rafts:

Supports:

Yes

Resolution:

Infill:

20%

Notes:

I've achived the best quality with the following settings in Simplify3d:

Top Layers: 4

Bottom Layers: 4

Outline: 4

Support:Normal

Infill: 10%

Piller Resolution 4.0

Angles: 90

Printing Speed: 50 mm/s

Use the following GCode in "Additional terminal commands for post processing" to pause the print to change the filiment from black to white.

{REPLACE "\nM102 Layer 103, Z=" "\nG1 X30 Y30\nM300 S1000 P1000\nM0\nM102 Layer 103, Z="}; pause at layer, move head, play sound

Category: Decor

Descrição

Print Settings