Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Stackable Lego storage boxes in 3 sizes. Two variations of each size exist, one with a space to insert magnets and one without. The magnets are small, inexpensive, and help keep the lid more secure but will work just fine without them.
Recommended Print Settings:
Default print settings will work just fine, however these are the settings that I personally used to print them. The included GCODE files for the MK4 will reflect these settings.
Layer Height: 0.20mm
Infil: 10% Gyroid
Permitters: 3
Solid Layers Top: 7
Solid Layers Bottom: 7
Supports: No
Most modern printers with decent bridging should not require any supports for either the box or lid when using PLA. However you can use supports on the bottoms holes if needed.
Magnets:
The magnets I used are 8x3x1 mm and can be sourced from Amazon. Magnets should be glued into place once printed.
Both STL and 3MF files included
Stackable Lego Storage Containers
Publicado em 11 de mai de 2024