Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Print one of everything, except the enclosure side, which you need 2 of.
Pause prints where needed and insert M3 nuts (https://www.amazon.com/gp/product/B071NLDW56). All nuts should be fully enclosed.
Attach parts with M3x12mm bolts (https://www.amazon.com/gp/product/B07WGCHPKF). I put a dab of hot glue on the chute just before the opening to improve roll.
Electronics:
- Micro servo
- Microcontroller (I used a Raspberry Pi Pico W and set up a local webserver for control)
- Batteries/wall adapter
Printables
Electronic Dice Tower/Dispenser
Publicado em 5 de mai de 2024
4
Curtidas
21
Downloads
Categoria
Other Toys & Games
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (9)
Enclosure Front.stl
145.7 KB
Barrel Fork NS.stl
66 KB
Enclosure Back.stl
121.8 KB
Enclosure Side.stl
74.9 KB
Barrel.stl
40.9 KB
Enclosure Top.stl
217.8 KB
Barrel Fork SV.stl
79.4 KB
Helix.stl
867.5 KB
Dice Dispenser - Barrel Fork Back.stl
99.1 KB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta