A Japanese Hex Toro style hexagon lantern  .

215mm height x 155 Width

200 mm Height Shade

Supports are required to print lantern base frame and top

The fassung-lamp socket ( e14-28 mm):
     [https://www.amazon.de/dp/B097K4YNL9](https://www.amazon.de/dp/B097K4YNL9)

The electrical cable and switch:
     [https://www.amazon.de/dp/B002DAOX58](https://www.amazon.de/dp/B002DAOX58)

The E14 Bulb used here:

      [https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-250-lm-kerzenfoermig-opalweiss-30498748/](https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-250-lm-kerzenfoermig-opalweiss-30498748/)
     

The slicer settings for the Base frame and Top:

.20 mm Standard

(All standard settings and speeds, Aligned seam settings)

Filament:  Prusament Galaxy Black

Support Settings

      Tree Supports on Base from Base Plate Only

       Normal Supports from Base Plate Only

The slicer settings for The Shade:

Filament:  Prusament Vanilla White

No Supports, Seams - Aligned

.16 mm High Quality and Generic PLA
Infill %  - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s

Seam Position- Aligned