This is a simple bracket for storing your Snapmaker Artisan modules when not in use. It attaches to one of the enclosure's aluminum extrusions using M5 machine screws and T-slot nuts. It can be mounted horizontally or vertically, although I'd recommend horizontally so as to avoid dust depositing on the working side of the module, especially for the laser module. You'll need to print at least two of them (for the modules not in use).

These are the screws and nuts I used: [https://www.amazon.com/dp/B0B1J3XHFF](https://www.amazon.com/dp/B0B1J3XHFF) [https://www.amazon.com/dp/B086MKNYDS](https://www.amazon.com/dp/B086MKNYDS)

If you have the adjustable mounting plate on your module(s), pmzandbergen has remixed this design to accommodate the adjustment screws on the plate. Here's a link to his remix:

[https://www.thingiverse.com/thing:6449661](https://www.thingiverse.com/thing:6449661)

Print Settings

Printer Brand:

Snapmaker

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm layers

Infill:

Category: 3D Printer Accessories