Summary

A simple track end stop is a great addition to the tracks collection. It features technic size holes allowing buffers to be added (shown on photos) or some other creative options.

More tracks available in this collection: [https://www.printables.com/@lev_133808/collections/626699](https://www.printables.com/@lev_133808/collections/626699)

Printing recommendations

PLA works great as material, you can find one which blends well with tracks sold in stores  or you can pick the color you like and print all tracks with it making your own unique set. Below are the key settings which you would need to pay close attention to when slicing

• No supports. All tracks have required supports built in, they are designed for easy break off with pliers.
• Disable arachne. When slicing it is recommended not to use arachne engine to ensure best results
• 2 perimeters. More perimeters could cause issues with bridging in some areas
• External perimeters first. These models are sensitive to external dimensions so this settings might help to get better results even when some other parameters aren't dialed in
• Elephant foot compensation. Will need some experimentation, it is important to ensure first layer doesn't get squashed when printing, otherwise it could cause bad connections between track

Instruction for removing supports

Project support

If you like the design and want to help to bring new ones you can consider buying me a coffee. Or support me by buying a paid model [https://www.printables.com/model/827401-lego-compatible-double-crossover](https://www.printables.com/model/827401-lego-compatible-double-crossover).