Added original author notes (The original by: @johnyHV)

My adaptation

Description

Case for raspberry-pi zero, zero W and zero 2 W with USB HUB ZERO4U [https://www.uugear.com/product/zero4u/](https://www.uugear.com/product/zero4u/). It's for retropie.org.uk gamening console.

I purchased mine through: [https://www.adafruit.com/product/3298](https://www.adafruit.com/product/3298) shipping to the USA.

If you use Raspberry-pi zero W or zero 2 W with WI-FI, then don't forget to use a ferrite ring for the USB hub. It's necessary for USB stability. The ferrite ring is in the package with a USB hub from version 1.3 [https://www.uugear.com/portfolio/is-zero4u-compatible-with-raspberry-pi-zero-w/](https://www.uugear.com/portfolio/is-zero4u-compatible-with-raspberry-pi-zero-w/).

Botton case is the same for all versions.

The top case is for

• zero and zero W
• zero 2 W.

The TOP version has three subversions

• with space for a heatsink
• without space for a heatsink
• changed the top moved the heatsink over for my v1.1 2016 Pi HS set, added labels for type. the files can easily be changed if your HS is in a different spot

I added original project files from Fusion 360

Printer settings:

• PLA filament
• 0.4 mm Noozle
• 0.2 mm quality
• Draft Print / Lower Quality Print on a FlashForge, I loaded to my P1S as well.

Parts:

• M2 X 8 Screws (4)
• Raspberry Pi Zero W
• Zero4u USB Adaptor