Description

This is a Tabletop Bowling Game similar to the classic Skittle Bowl game from the 70s.  Its a fun little game that is perfect for adults and kids alike!  To play, pull back the ball, aim and let go, its addictively easy!

Updates

• Added a rod cap to make it easier to adjust the length of the string and fasten to the rod

Printing 

• For the base and posts - I used the 0.2 mm Standard settings with an infill of 15% in Bambu Studios. It took about 2 hrs 20 mins to print with the dual colors.
• For the Pins -  I used the 0.2 mm Standard settings with an infill of 25% in Bambu Studios. It took about 2 hrs 20 mins to print with the dual colors.
• For the Ball - I used the 0.2 mm Standard settings with an infill of 50% to give the ball some weight.  It took about 20 mins to print.

Assembly

To assemble:

• Put the adapter rod into the board.
• put the top rod into the adapter rod.
• tie a string to the ball
• put the string through the hole in the top rod
• adjust the length of the string and put the rod cap on.