Introduction

This lino plane will allow you to shave off fe few milimeter off your lino roll.
This is quite usefull for fine tuning the lenght of your lino.

Lino width:

It will shave off around 3mm off your lino, depending on your printer.

Usage

Add a blade to the lino plane and use the wedge for the blade to be sturdy.
Try first on a lino waste in order to get use to it.

Parts

You will need one lino plane and 2 wedge.
The toleration are quite tight, don't hesitate to scale down wedge or scale up lino.
You will also need a 18mm wide blade.
 

Warning

Be carrefull while using this tool, it can be dangerous with the blade.