Another HueForge Painting of my Sea series, my favorite so far!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #11 (0.96mm) swap to Orange
At layer #18 (1.52mm) swap to Yellow for the rest.