Spraycan Storage Carousel. Could be stacket into a tower.
3D printable and module based to any height.
I stored 36 spray cans slick and practical, taking up 0,04 m2 of floor space.
Made for Cans Ø69 (typical spray paint), but can be adapted to f.ex Ø53 and Ø58 (typical WD40 & CRC)
The "carousels" are stacked on a pipe Ø32, I used one from PP, but PVC or any metal would be prefered for stiffnes for many modules of cans in height. A base for the Ø32 tube of some mass must be sourced. I just welded together some pieces of square steel pipe as a stand base. Height of sections are decided by cutting PP pipe Ø40 as spacers, super glued between the 2 discs. I used 110 mm lenght spacers between each disc. The clips on base disc is optional, experienced that I could do without them. 3D print the parts, PETG,ABS,PLA all suits the mechanical properties.