Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Lovely book keychain which comes in 2 flavours.
Plain book
Print the book cover in any color you like. The paper should be printed white. 2. Langenscheidt book
Langenscheidt is a German media company famous for its dictionaries. They have the iconic blue L on the yellow ground as their identification.
Print Settings
Printer Brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
No
Resolution:
0.2 mm initial layer, 0.2 mm layer height
Infill:
20 %
Filament: GIANTARM, 3DJake ECOPLA PLA Green, Yellow, Light blue, White
Notes:
Should be an easy print. No supports needed. There are guides in the paper and in the cover to make the assembly and glue job easy for you.
If you print the plain book, just print "Book keychain plain book V1.stl" and "Book keychain paper V1.stl".If you print the Langenscheidt book, print "Book keychain book Langenscheidt V1.stl", "Book keychain paper V1.stl" and "Book keychain paper text Langenscheidt V1.stl".
Post-Printing
Book keychain assembly part 1
Print the cover and the paper.
Book keychain assembly part 2
Peel a string though the hole in the paper twice to form a sling outside of the paper.
Book keychain assembly part 3
Add a knot. Make sure the sling has the size you like.
Book keychain assembly part 4
Cut the string as shown on the picture. Put some glue onto the knot and the remaining ends of the string to make sure that the knot will not accidently open once everything has been put together.
Book keychain assembly part 5
Add glue to the inner, upper and lower side of the paper. Slide the paper into the cover. Put some heavy item onto the assembly till the glue is hard.
If you assemble the Langenscheidt book, glue the "L" to the cover.
Category: Keychains
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta