SnapLock Simple Swatch Box (parametric)

This swatch box is based on the SnapLock Storage Box by Hugo and holds the customizable Simple Swatch. Thanks to Hugo's excellent design, no hardware is required.

STLs are included for boxes that will hold either 22 or 30 swatches. Print two latches, plus the bottom and lid.

Customizing

The parametric Fusion 360 file can be easily customized for different numbers or for different sized swatches. The main parameters to adjust are:

num_swatches	recommend even numbers only, ≥ 22 to avoid breaking model
swatch_length	(from model perspective, y-axis)
swatch_width	(from model perspective, x-axis)
swatch_height	(from model perspective, z-axis)

Many other parameters are available to adjust things like tolerance around the swatches, chamfer distances and fillet radii. If you change these, you will need to check and see how it affects the swatch slots.

Descrição

Customizing