Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is simple Small Vise that does not need any metal bolts :)
If you are going to print this I suggest you do 3 Perimeters and set it to 40%+ infill and use gyroid infill
Also you may need to put a little grease on the enclosed axle. I just put a little bit on each side and worked it in and it stopped all the squeaking I was getting :)
119
Curtidas
354
Downloads
1
Impressões
Categoria
Tools
Tags
vise
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (7)
small_vice_rotating_jaw.stl
258 KB
small_vice_sliding_jaw.stl
488.9 KB
small_vice_static_jaw.stl
2.4 MB
small_vice_rotating_jaw_rod.stl
670.8 KB
small_vice_ground_plate.stl
1.2 MB
35mm_long_10mm_bolt.stl
332.8 KB
small_vice_knob.stl
25.6 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta