This model was designed to create an offset between a wall and a decorative piece. when you chose to use the offset you can place LED strips behind the decorative piece for some cool effects like I did with a monster enery look alike logo as shown on the pictures.

Partslist:

M4 x 35 woodscrews (for part1)

M4 or M3 x 15 woodscrews (for part2)

M3 x 15 countersunk screws (the type you would use with threaded inserts) (for part2)

Printsettings:

layerheight: 0.3mm

Infill: 15%

Nozzle: 0,4mm