Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
A simple drawer latch that you can print in one go - no glue or extra parts needed.
Comes in two versions - with and without holes for m5 screws. In my experience it's simpler to print without holes and use super-glue.
After printing you may need to apply some force to push the latch out of the hole. Afterwards it should move freely.
Print Settings
Printer: Sovol SV06
Rafts: No
Supports: No
Resolution: 0.2mm (0.1mm won't increase print time by much)
Infill: 25-100%
Filament: PLA/PETG
Print time: ~30m
2
Curtidas
40
Downloads
Categoria
Office
Tags
latch
drawer
simple
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (4)
drawer_stop_fat_tol_v2_smooth.stl
45.6 KB
drawer_stop_fat_tol_v2_smooth_m5_screw.stl
343.1 KB
drawer_stop_fat_tol_v2_smooth.blend
951.5 KB
drawer_stop_fat_tol_v2_smooth_m5screw.blend
1.4 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta