Hey everyone!

This design prints support-free and comes with an optional locking lid. It is designed at a pretty small scale and the locking feature may struggle if scaled down any smaller, but feel free to scale it as big as you want!

*Note: The cauldron does print upside down as it will import, the bottom of the cauldron will bridge. I've tested it on multiple printers and it looks great, but if you are having trouble you could add some supports to the bottom center of the cauldron.

**These designs are uploaded with a non-commercial license. Printing this file does not grant you the right to sell commercially.

If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at
[https://www.patreon.com/thinair3D](https://www.patreon.com/thinair3D)

Printing Info:
These are just the settings I used to test the model, feel free to use whatever settings work best for you.
- FDM or Resin: FDM
- Scaling: Can be scaled up, scaling down may cause issues with the articulation points.
- Supports: None
- Infill/Perimeters: 15% infill + 2 perimeters. Use 3 perimeters for extra strength.
- Nozzle Size: 0.4
- Layer Height: 0.2 (Adaptive layer height if you can, or the smaller the layer height the better.)