I'm tired of having to print an entirely new print bed scraper when the one I have inevitably wears out so I've created one with a replacement blade to cut down on print time and wasted materials.

Print instructions

• print settings: 0.4mm nozzle, 0.20mm layers, 3 perimeter walls, 25% infill, 3 solid bottom layers, 5 solid top layers
• print the “Bed Scraper” model on it's side and the replacement “Blade” flat as shown

Change log

v2 (3/27/2024): add “Blade - Looser fit.stl”

v1 (3/26/2024): initial release