Needed some corner shelves to fit in a small gap between the window and the wall.....

Print two of the mounting blocks, mount the blocks to the wall with appropriate screws/wall mates/hollow wall anchors then slide the shelf over the blocks and secure with some small screws from the bottom.

Shelf is 167mmx167mm, 20mm high.

Print Settings

Printer Brand:

Wanhao

Printer:

Rafts:

No

Supports:

Resolution:

.28

Infill:

Filament: 3D Fillies PLA+ White Post-Printing

1. Mount the mounting blocks to the wallrn2. Slide the shelf over the blocksrn3. Insert some small screws from the bottom to secure the shelf

Category: Organization