This is a right angle adapter for the Neutrik Ethercon NE8MC-B connector ( [https://www.neutrik.com/en/product/ne8mc-b](https://www.neutrik.com/en/product/ne8mc-b) )on an 8mm CAT-6 cable. The parts clamp on to the connector and is held in place by the ring that fits the grove just past the threads. It is held in place with 6 M3 x 14mm buttonhead cap screws that self tap into the left side part. The holes in the right side part allow the screws to pass through. (depending on your printers tolerances) I tapped the holes prior to assembly. No modification of the connector or the cable are required.

I printed it .2mm, 15% gyroid and 4 walls. I also used supports to ensure a nice clean interface for the connector and the cable.