Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D MTG Counters + Case - Fits in Deckbox por TheMakerSphere no Printables

Descrição

If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀

This is a remix off of ChappIO's really nice MTG Counters design. The following changes were made:

  • Made the box 1mm overall thinner (only 4.2 mm thick!)
  • Uses squared counters rather than the winged counters
  • The counters use MTG Arena icons
  • The counters are 1mm thinner for an overall thickness of only 1mm
  • Added text and logos to the lid

All parts were printed using a 0.4mm nozzle (standard sized nozzle) to make this as accessible as possible to everyone! 

Please note, I have only tested a flat build plate (not textured)

These counter boxes fit inside of most deck boxes. I tested all the deck boxes I own and they fit inside each one without issue. The overall box itself is the same size as my Ultra Pro eclipse sleeves in terms of length and width! The box lid may be a bit tight after printing. Sliding it back and forth a few times should loosen it up. It does stay closed when shaking it, so you shouldn't have any issues with the lid coming undone.

There are .3mf files for Bambu Lab owners to use to print. Alternatively, you can download Bambu Studio and open the .3mf files to see all the settings I applied.

For printing the lids with text and/or logos, I have included the STLs. They are sized at 0.20mm tall and should be embedded in the top of the lid 0.20mm deep if you want a smooth surface.

The following counters are available:

Ability/Boardstate Counters:

VigilanceFirst StrikeDouble StrikeLifelinkDeathtouch
FlyingHasteHexproofIndestructibleTrample
DefenderMenaceReachSummoning SickOn an Adventure
ForetellCan't AttackCan't BlockRing BearerThe Ring Tempts You
ShieldGoadCopyPoisonPrototype
EnergyFinalityQuest/Lore  

+1 / +1 Counters:

+0 /+1+1 / 0+1 / +2
+1 / -1+1 / +1+2 / +2
+3 / +3+ 5 / +5+10 / +10

-1 / -1 Counters:

+1 / -1-1 / -1-2 / -2
-3 / -3-5 / -5-10 / -10

Tokens:

1 / 12 / 23 / 34 / 4
5 / 56 / 67 / 78 / 8
9 / 910 / 1020 / 20Gold
TreasureFoodClueBlood

 

Be sure to check out my MTG 3D Print Projects page if you are interested in even more MTG prints like this from myself and other very talented makers!

Printables

MTG Counters + Case - Fits in Deckbox

TheMakerSphere TheMakerSphere (abre em nova aba)

Publicado em 5 de set de 2024

213
Curtidas
1,174
Downloads
11
Impressões
Categoria Other Toys & Games
Tags
mtg magic tokens magicthegathering counters token mtgcounters mtgbox mtgedh mtgaccessories
Licença Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (67)
print-boxes.3mf 378 KB
print-counters.3mf 1.8 MB
Base.stl 233.5 KB
Lid.stl 5.7 KB
Lid - Symbol - Planeswalker.stl 107.1 KB
Lid - Text - -1 -1.stl 19 KB
Lid - Text- +1 +1.stl 22.2 KB
Lid - Text - Abilities.stl 179.9 KB
Lid - Text- Goad & Shield.stl 347.1 KB
Can't Attack.stl 427.4 KB
Can't Block.stl 77.4 KB
Copy.stl 82.1 KB
Deathtouch.stl 336.7 KB
Defender.stl 364.4 KB
Double Strike.stl 213.5 KB
Energy.stl 87 KB
Finality.stl 158.3 KB
First Strike.stl 208.5 KB
Flying.stl 263.9 KB
Foretell.stl 144.7 KB
Goad.stl 84.5 KB
Haste.stl 95.8 KB
Hexproof.stl 212 KB
Indestructible.stl 246.8 KB
Lifelink.stl 120.6 KB
Menace.stl 83.7 KB
On an Adventure.stl 331.8 KB
Poison.stl 110.8 KB
Prototype.stl 106.9 KB
Quest - Lore.stl 159.8 KB
Reach.stl 274.9 KB
Ring Bearer.stl 205 KB
Ring Tempts You.stl 110.4 KB
Shield.stl 347.9 KB
Stun.stl 108.3 KB
Trample.stl 202.6 KB
Vigilance.stl 281.7 KB
+1 +1.stl 41.1 KB
+1 +0.stl 60.6 KB
+0 +1.stl 60.6 KB
+1 -1.stl 39.5 KB
+1 +2.stl 54.9 KB
+2 +2.stl 68.6 KB
+3 +3.stl 91.9 KB
+5 +5.stl 71.6 KB
+10 +10.stl 85.6 KB
-1 -1.stl 38 KB
-2 -2.stl 65.5 KB
-3 -3.stl 88.8 KB
-5 -5.stl 68.4 KB
-10 -10.stl 82.5 KB
1 - 1 Token.stl 37.6 KB
2 - 2 Token.stl 70.2 KB
3 - 3 Token.stl 93.8 KB
4 - 4 Token.stl 34.1 KB
5 - 5 Token.stl 71.6 KB
6 - 6 Token.stl 98.1 KB
7 - 7 Token.stl 43.1 KB
9 - 9 Token.stl 97.7 KB
8 - 8 Token.stl 113.4 KB
10 - 10 Token.stl 86.4 KB
20 - 20 Token.stl 115.3 KB
Blood Token.stl 188.9 KB
Clue Token.stl 298.6 KB
Food Token.stl 790.2 KB
Gold Token.stl 1.1 MB
Treasure Token.stl 101.1 KB
Ver no Printables (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora