This is a keychain container for your earplugs. The container consists of two parts that screw into each other.

Print settings:

• Material: PLA
• Layer height: 0.2mm (otherwise the screw thread won't print correctly)
  Advanced: in PrusaSlicer, you can set different printing layer heights at different print heights. You can use this to print the entire model in 0.3mm and the screw thread part in 0.2mm to speed up the print time. To implement this, right-click the model, click ‘Height range Modifier’ and set the desired layer heights at the correct heights (heights in mm, not layer number!). See this tutorial for more information: [https://help.prusa3d.com/article/modifiers_1767](https://help.prusa3d.com/article/modifiers_1767)
  The provided gcodes have this feature built in.
• Supports: none
• Infill: 100%
• Orientation: as set in the stl