This is a simplistic fake prop camera that prints with minimal supports. This took around 1 hour and 13 minutes to print and used around 43g of filament on my AnkerMake M5C.

Features:

• 2 hooks to attach a strap or string
• Fake lens
• Fake button
• Fake wheel
• Flash compartment
• Says “smile” where the brand should  be :)
• Rounded corners so it is not painful to hold

Print Settings:

• File is already in correct orientation for printing.
• Supports (I used snug supports on AnkerMake slicer, which used 0.52g of filament on support material).
• Any infill (depending on how strong you need it).

Dimensions:

The whole camera is 100mm x 61.25mm x 48.5mm.

I designed this using TinkerCAD.

I have also posted this on Thingiverse.

Feel free to leave a comment if you have any questions and please post a make to let me know how you found it to print. I hope you enjoy this and, as always, Happy Printing!!