My goal in making this was to create a flexible and quick-adjustable arm for a phone or camera. The buttons are spring-loaded and to adjust you simply push down and then release to hold in the desired position. The button behind the mount provides rotational adjustment on the mount plate. 

In addition to the printed parts you will need some springs, a magnet, some screws, some glue and a ¼ inch camera mount adapter. All the items are easily obtained from Amazon at a reasonably low cost - the details and links are provided in the assembly instructions.

The phone clamp shown in the photos can also be obtained from Amazon at ~$5. [https://a.co/d/c5vNecl](https://a.co/d/c5vNecl) 

I used PLA Plus which worked quite well but you might want to use a stronger material like PETG or ABS, depending on the planned use.

No supports are required.

Printed at layer height of 0.2mm, except for the Gear_Mesh_V1 and Top_Mount_Round_V1 which I would recommend 0.15mm.