Heroic logo turned into 3D and ready to print! :D I printed this at twice the original size, but remember to print the top parts a bit smaller scale so it can fit in the holes on the backplate (the small parts are hard to sand, I printed them around 2% smaller so at 198% and they fit).

The left/right parts are basically the same, just mirrored. You can put all the files from the "top" folder into your slicer at once and scale/rotate them together and tell your printer to print them one by one so it's less work for you!

I also suggest sanding the top side of the backplate before you stick the rest on it, and after you glu everything together - sanding the top of the whole thing (the white, most iconic part of the logo).

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.12

Infill:

Filament: . . black/white/red

Notes:

I suggest sanding the top side of the backplate before you stick the rest on it, and after you glu everything together - sanding the top of the whole thing (the white, most iconic part of the logo).

How I Designed This

I googled Heroic's logo and turned it into a vector graphic with some free online converter, then gave it the right shape in fusion 360.

Category: 3D Printing