This File is 200x200mm .  If you have a smaller build plate you can change the size, but DO NOT CHANGE THE Z it will throw the colors off.

You are not limited to the colors I used, you do not have to use bambu colors.  Using the colors I used are will give you the look I printed.

2 file types. One is the 3mf from bambu studios created using a Bambu P1S profile.  Other is just the stl file and you will need to apply the layer color height changes.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #10 (0.96mm) swap to Blue Gray
At layer #15 (1.36mm) swap to Ash Gray
At layer #21 (1.84mm) swap to Jade White for the rest.