Estás en 3DFinder
Buscamos en Thingiverse, MakerWorld y Printables al mismo tiempo para darte lo mejor de cada una.
Descripción
Filament Spool Rack
I've designed this filament spool rack to locate all the spools for our Prusa XL on one side. I've relocated one of the filament sensors to reduce the bowden length.
Some remarks
- There are two versions of the axle assembly. One with 608 bearings and one without. I found the solution without the bearing to be best.
- I suggest to use support under the axle cut-out track when printing the divider-plates.
Bill of Materials (BOM)
| TYPE | LOCATION | QTY |
|---|---|---|
| M5 x 12mm SHCS | Divider plates | 15-off |
| M5 Drop-In Nuts | Divider plates | 15-off |
| M3 x 15mm SCHS | Filament guide funnel | 5-off |
| M3 Drop-In Nuts | Filament guide funnel | 5-off |
| M5 x 25mm SHCS | Left- and right end plate | 6-off |
| M3 x 10mm FHSC | Rubber feet | 4-off |
| M3 Drop-In Nuts | Rubber feet | 4-off |
| 2020 Aluminium Extrusion (L = 470mm) | Frame | 3-off |
| ECAS04 Bowden Connector | Filament guide funnel | 5-off |
Part Descriptions
50
Me gusta
176
Descargas
1
Impresiones
Categoría
Prusa Parts & Upgrades
Etiquetas
filament
organizing
prusaxl
filamentrack
voron24
voron24r2
Licencia
Creative Commons — Attribution — Noncommercial — Share Alike
Archivos (10)
installation-tool-4x-v1.stl
46.2 KB
axle-5x-v1.stl
218.8 KB
feet-4x-v1.stl
151.6 KB
axle-roller-without-bearing-10x-v1.stl
269.8 KB
filament-guide-funnel-5x-v1.stl
557.8 KB
left-side-v1.stl
779.7 KB
axle-roller-wheel-10x-v1.stl
341.8 KB
right-side-v1.stl
779.7 KB
axle-inner-wheel-10x-v1.stl
445.7 KB
divider-plate-5x-v2.stl
185.6 KB
¿Te gusta este modelo? Crea una cuenta gratis para guardar tus favoritos y volver a ellos más tarde.
Crear cuenta