Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Items you need:
- 2 x “4mm x 30cm” paracord.
- *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).
- Super glue (for the eyes and magnets).
*If you do not have magnets, I have included a 3D printed Connector.
Suggested print settings for the Main Body:
- Layer height 0.2mm.
- Infill 30%.
- Position the print in a way that the joining face is facing downwards.
- No supports needed.
Suggested print settings for the Eyes:
- Layer height 0.2mm.
- Infill 15%.
- No supports needed.
Suggested print settings for Holder-Peg:
- Layer height 0.2mm.
- Infill 30%.
- Perimeters: 5 (for strength).
Suggested print settings for the Holder-Body:
- Layer height 0.2mm.
- Infill 15%.
- No supports needed.
Assembly
Ensure the smoother side (the side on the print bed) faces outward.
For more interesting zipper pull charms, be sure to track this tag (Zipperrific).
We've even conjured up a little home for our zipper pulls – because they deserve a stylish rest when they're not out and about with you! And to top it off, each zipper pull features a sneaky slit perfect for showcasing photos, name cards, and more. They're not just zipper pulls; they're your new tiny, table-top pals!
NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.
