Introducing the "Stackable Lego-Inspired Storage Box" – the ultimate companion for your Lego collection! This marvel of 3D printing technology is the perfect solution to tidy up your space. Imagine a stackable box with a convenient slide-out drawer, reminiscent of a Lego skyscraper.

Bid farewell to clutter and embrace a world of neatness. With its chic design, this drawer transforms your miscellaneous items into organized treasures. It's so appealing that even your Lego bricks will yearn for a staycation inside!

Elevate your storage game, dazzle your friends, and let the Lego enthusiasm spread. Give your possessions the luxury treatment they deserve!
 

Printing Instructions:

I made sure that there were no unnecessary elements on the surface that would affect the quality of the print. The pins are printed separately and have a polygon shaped attachment - so you can print and mix different color combinations.

You can print this design below 70% scale with no problem.
Crafted for printing with minimal supports, ensuring that no supports mar the visible surfaces post-assembly. 

A bit of super glue can be used for perfect assembly, but not needed.

What you need:

• 4x small pin (top part)
• 1x center pin (bottom part)
• 1x box - place it on its back so that the hole (for insert) is facing up
  (the most efficient print with minimum support you can block the polygonal hole)
• 1x insert - place it on its bottom so that the hole is facing up
  
  Recommended settings:
• Some printers have adhesion issues that cause the print to peel off the pad. You can turn the box by 45 degrees add brim and add supports to the edges, for example using a brush in a slicer. see the last image in the gallery
   
• 0.20mm layer height
• 3 perimeter shells
• (15% or less) gyroid infill.

Support settings:

• Default can be used, but organic is recommended.
• Brim is optional, depending on your printer's needs.

Download, print, like and don't forget to share photos of the prints.