Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
I needed a simple way to mount 12mm pushbutton for a recent project (foot switch), so I made this.
There are 2 versions (with 2 screw holes and 4 screw holes), each for m1.6 , m2 and m3 screws.
I printed mine out of PLA and didn’t have problems soldering wires to the button, but if you want to be sure you can print it out of a more heat resistant material like ABS or PET.
I also made a mount for 6x6mm pushbutton if that suits your needs better.
12
Curtidas
153
Downloads
1
Impressões
Categoria
Electronics
Tags
switch
mount
buttons
button
pushbutton
push
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (12)
12mm button mount 2x2.3mf
28.2 KB
12mm button mount 4x1,6.3mf
29.9 KB
12mm button mount 4x3.3mf
32.5 KB
12mm button mount 2x3.3mf
29.2 KB
12mm button mount 4x2.3mf
30.8 KB
12mm button mount 2x1,6.3mf
27.7 KB
12mm button mount 2x1,6.stl
47.9 KB
12mm button mount 4x3.stl
68.6 KB
12mm button mount 4x1,6.stl
60 KB
12mm button mount 2x3.stl
52.2 KB
12mm button mount 4x2.stl
62.4 KB
12mm button mount 2x2.stl
49.1 KB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta