This is a work in progress still. I know this is an older phone, but i really liked porter7o's design, but wanted it to watch videos and that's it, so standing up was less ideal. I realize i could have just laid it sideways, but i thought it would be fun to make one. The concept is really the only thing i took from their model, the rest i generated myself. I run a thin plastic case on my phone and have sized it for that, but with shrink it might fit fine. I scaled the model up 1.02 before print to account for the shrink, try without scale for no case, let me know how it works. I will eventually get a few more variations up when i have time.

Edit: 2018-07-16

Uploaded Rev01, reduced material, tried to improve sound performance a little bit. Added port for charging cable, based on google's fast charge type C cable. Scaled to 1.01% works for phone with no case. Little bit of play, but not to much.

Edit: 2018-07-17

Updated pictures to Rev01 and removed Rev00 pictures and model.

Edit:2018-10-28

No longer working on this.

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

Yes

Supports:

Resolution:

.2

Infill:

Notes:

I used 6mm rafts to help hold it down, you may not need them if you have good bonding on large parts. I also scaled it 1.02% before slicing. I have a thin plastic case on my phone, so printing it without scale for no case maybe pretty close.

Category: Mobile Phone