Just a gate catch I made to keep the gate out of the way while open. Made for this gate ([https://www.amazon.com/dp/B09JKVBHKS?psc=1&ref=ppx_yo2ov_dt_b_product_details](https://www.amazon.com/dp/B09JKVBHKS?psc=1&ref=ppx_yo2ov_dt_b_product_details)).

Requires you to be able to lift up on the gate to release and engage it.

Wall mount is for a #6 screw, pivot is for a round head M4x10mm.

I printed it solid since it was so small and wanted to make sure it would hold up and cleaning out holes wouldn't be an issue.

Center piece could easily be replaced with something else. Dimensions in picture to help you model a replacement middle. I only made mine 15mm wide.

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

No

Supports:

Resolution:

.15

Infill:

Filament: Hatchbox PLA Gray Post-Printing =============

Did have to drill out the holes for a #6 screw as they had closed up a little, but not a big deal.

Category: Replacement Parts