Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Lava Red Transmission Distance: 1
PLA bambulab green mistetloe Transmission Distance: 2
PLA azurefilm White Transmission Distance: 3.7

Swap Instructions:
Start with Charcoal Black
At layer #9 (0.8mm) swap to Lava Red
At layer #13 (1.12mm) swap to green mistetloe
At layer #19 (1.6mm) swap to White for the rest.