New Jersey Devils logo created with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. Follow my profile for more team logos as I will continue adding more.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA crealty red Transmission Distance: 2.5
PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to red
At layer #14 (1.2mm) swap to White for the rest.