Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Suggested print settings for PLA:
- Layer height 0.2mm.
- Infill 80-100%.
- Perimeters: 5 (for strength).
- No supports needed.
- Optional: Enable Ironing (for better surface results)
- Flow Rate: 15% (default).
- Spacing between ironing passes: 0.1mm (default).
- Ironing Type: All top surfaces (default).
Suggested print settings for PETG:
- Layer height 0.2mm.
- Infill 80-100%.
- Perimeters: 5 (for strength).
- Brim Width: 3mm.
- Brim Separation Gap: 0.45mm.
- No supports needed.
- Optional: Enable Ironing (for better surface results)
- Flow Rate: 15% (default).
- Spacing between ironing passes: 0.1mm (default).
- Ironing Type: All top surfaces (default).
Explore other backpack accessories HERE.
NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.
51
Curtidas
209
Downloads
3
Impressões
Categoria
Other Fashion Accessories
Tags
upgrade
diy
hardware
25mm
strap
backpack
travel
gate
molle
upgrades
customized
nylon
webbing
dring
mollesystem
customised
gated
polyester
whatpack
twb
packware
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (2)
dring-gated-nologo-thewhatbrandsg.stl
131.9 KB
D Ring Gated.3mf
55.3 KB