This holds 2 micro dell servers and their power supplies in 1U of server rack space. There is included cable management.

The pictures show this printed in PLA+. You will need a printer with a build area of at least 225mm x 185mm x 50mm to print these parts. With a 250mm x 250mm print bed, this takes 5 full beds to complete.

Materials needed:

• Filament (if you intend to weld) or glue
• Small screws

Tools needed to assemble:

• A hammer
• Needle nose pliers (to hold pins before tapping in)
• A screwdriver

Extra tools if desired:

• Clamps for assembly and holding during gluing / welding
• A dremel if you intend to weld rather than glue