Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Superman logo cufflinks.
Easy to print and snaps tightly together.
!!! Now with a multi-material version !!!
The cufflinks hinge is inspired by the Star Wars Cufflinks by belch: [https://www.thingiverse.com/thing:104758](https://www.thingiverse.com/thing:104758)
I needed superman cufflinks and could not see a good way of printing them on a 3D printer without sacrificing the curved surface of the logo.
After some redesigning i came up with the 2 part snap-fit design.
There are 2 files needed to print a single cufflink.
- The Cufflink_Pins.stl is the part that goes into the shirt - the hinge printed in place.
- The Cufflink_Head_XXXX.stl is the head of the cufflink (Pick the one you desire)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Doesn't Matter
Supports:
Doesn't Matter
0,12
Infill:
30
Filament:
Spectrum PLA Shiny Black
Notes:
All files should be turned in the direction ready for printing.
After printing you might need to go over the piece removing unwanted material from the print bed - ensuring the pieces fits together.If the hinge does not rotate - use a knife to cut between the pins and the hinge without going too deep.
Use brim if the corners bend up.
Category: Accessories
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta