Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Remixed Jam4ar's drop-ceiling cable hanger to allow one to hang something with a traditional key-hole hanger from the ceiling. I personally wanted to have a light-weight guest router (Netgear Nighthawk) suspended from the ceiling in my office (Most commercial/enterprise APs have mounts for this), but it only had key-hole hangers for wall mounting. After a little trial and error, I came up with these two designs which have worked quite well.
Both versions of the hanger allow for 8.4mm of space between the head of the peg and the body of the hanger.
The "hanger_thick" file is slightly thicker and has a bit more ranforced post.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
No
Supports:
Yes
200
Infill:
50
Filament:
eSun PLA+
Notes:
- No matter how your orient this, you will need supports If you have a PEI bed, clean lightly, as I found these a bit hard to get off when using 99% ISP due to their size they flex easily with the bed instead of popping off If you are hanging anything heavy, increase your perimeters to 4 Would not recommend standard PLA, either go for PLA+, PETG or ASA/ABS
Category: DIY
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta